How to enroll RFID Cards on a ZKTeco F17 terminal
For the enrollment of users on the F17 device, the staff member must first be loaded in Binary City Time.
Ensure that the staff member is loaded on Binary City Time and synced to the device first (never enroll a new user without creating the person in Binary City Time first).
For instructions on how to load a new employee in Binary City Time, please refer to the section in our manual, by clicking here.
Prerequisite: Create the employee in Binary City Time.
Step 1: On the F17, press the Menu button
Step 2: If any administrator, has already been linked to the device, it will indicate: “Admin Affirm”, which means that general staff members cannot open the menu of the device. A registered “device administrator” needs to then open the menu with his or her registered fingerprint (or pin code, or RFID card).
Step 3: Once the menu is open, simply press the OK button just below the screen to select the option User Manage.
Step 4: Press OK on Enroll User
Step 5: Scroll down to Reg RFID and click OK
Step 6: Press ESC when prompted for New Enroll to change to Chg ID Card.
Step 7: On the keypad, enter the Device ID (On the device, this is referred to as the PIN) for the employee you wish to enroll and press OK.
Step 8: Swipe the RFID card over the sensor.
Step 9: Once successful, press OK to save the template.
Step 10: You can continue to enroll another fingerprint for the same employee, by simply pressing OK and following the same steps.
Once done, press ESC to exit the menu