DESCRIPTION:
The ZKTeco 4500 enrolment reader allows for easy enrolment of staff fingerprints in the comfort of your own office. The device can be setup on any laptop or computer to allow the user to capture fingerprints during the staff setup process and then pulls the fingerprint templates to an allocated device (either in your office or other branches in other other locations).

SPECIFICATIONS:
Software: Binary City Time
Method of communication: USB

DESCRIPTION:
The ZKTeco SLK20R enrolment reader allows for easy enrolment of staff fingerprints in the comfort of your own office. The device can be setup on any laptop or computer to allow the user to capture fingerprints during the staff setup process and then pulls the fingerprint templates to an allocated device (either in your office or other branches in other other locations). In addition, the ZKTeco SLK20R makes use of a Silk ID fingerprint sensor.

SPECIFICATIONS:
Software: Binary City Time (https://www.bcity.me/binary-city-time)
Method of communication: USB

DESCRIPTION:
The ZKTeco F22 is one of our new generation time & attendance and access control devices that makes use of the a Silk ID fingerprint sensor with 3D NFPV technology, capable to provide an exceptional performance toward dry, wet and rough fingerprints that dramatically increases the verification speed.

SPECIFICATIONS:
Fingerprints that can be stored: 3,000
RFID cards that can be stored: 5,000
Transactions stored in memory stored: 30,000
Method of communication: Wi-Fi, TCP/IP,USB host,RS232/485

NOTE:
This device cannot be installed outside and is typically used inside the offce.

DESCRIPTION:
The IN01-A is our number 1 selling time & attendance device and is very user friendly. This device is easy to install, with only a power supply and network connection needed close by. It also it comes with a built-in battery backup.

SPECIFICATIONS:
Fingerprints that can be stored: 3,000
RFID cards that can be stored: 10,000
Transactions stored in memory stored: 100,000
Method of communication: TCP/IP by default, but also USB and RS485
Power supply: 12V DC 3A. The IN01-A also comes with a built-in battery backup that will keep the device online for ± 1 and a half hours

NOTE:
This device cannot be installed outside and works best in an environment where staff typically need to pass when entering their workplace.

DESCRIPTION:
The ZKTeco MB800 is a facial recognition device which is used for time & attendance and access control. This versatile device works effectively and securely, allowing a combination of functionalities such as facial recognition, fingerprint and RFID Card.

SPECIFICATIONS:
Facial Templates Stored: 1,500
Fingerprints that can be stored: 4,000
RFID cards that can be stored: 10,000
Transactions stored in memory stored: 100,000
Method of communication: TCP/IP by default, but also RS485
Functions: 50 timezones.

NOTE:
Typically this device will be installed indoors where lighting is constant day to day.

DESCRIPTION:
The ZKTeco ProCapture WP is one of our new generation access control devices that makes use of the a Silk ID fingerprint sensor with 3D NFPV technology, capable to provide an exceptional performance toward dry, wet and rough fingerprints that dramatically increases the verification speed.

SPECIFICATIONS:
Fingerprints that can be stored: 20,000
RFID cards that can be stored: 10,000
Transactions stored in memory stored: 100,000
Method of communication:TCP / IP, RS485 (For Slave Reader), USB Host, Wiegand Input / Output,

NOTE:
This device is Water Proof and is perfect for inside as well as outside applications.

DESCRIPTION:
SpeedFace-V5L is a high-speed biometric access control terminal with facial recognition in the SpeedFace-V5L Series. Using intelligent engineering facial recognition algorithms and the latest computer vision technology. It supports both facial and palm verification with large capacity and speedy recognition, as well as improves security performance in all aspects.

SPECIFICATIONS:
Ideal for Access Control & Time & Attendance
5-inch touchscreen display
Supports up to 10,000 faces & 10,000 fingerprints
Supports up to 3000 Palm Templates
Supports up to 10,000 cards
Operates in total darkness & bright sunlight (< 50k Lux)
Comms: TCP/IP, Wiegand In/Out, RS485, Wifi
Visible light camera (speed & remote face enrollment)
Infrared light camera (accuracy)
Powerful anti-spoofing engine
Controls door lock, alarm, exit button, auxiliary input

DESCRIPTION:
ProFace X [P] is a high-speed biometric access control terminal with face and palm vein recognition within the ProFace X Series product line, which is designed to deal with all kinds of scenarios

SPECIFICATIONS:
Ideal for Access Control & Time & Attendance
8-inch touchscreen display
Weatherproof (IP68 and IK04 vandal resistant)
Supports up to 50,000 face templates & cards
Supports up to 5,000 palm templates
Operates in total darkness & bright sunlight (< 50k Lux)
Comms: TCP/IP, Wiegand In/Out, RS485, Wifi
Visible light camera (speed & remote face enrollment)
Infrared light camera (accuracy)
Powerful anti-spoofing engine
Controls door lock, alarm, exit button, auxiliary input

NOTE:
This device is Waterproof and is perfect for inside as well as outside applications. This device is IP68 rated and IK04 vandal resistant.

DESCRIPTION: 
SpeedFace-V5L [TD] is a high-speed biometric access control terminal with face, palm vein and fingerprint recognition with mask detection and body temperature measurement within the SpeedFace-V5L Series. SpeedFace-V5L Series is a fully upgraded version of the SpeedFace-V5L Visible Light Facial Recognition Terminal, using intelligent engineering facial recognition algorithms and the latest computer vision technology. It supports both facial and palm verification with large capacity and speedy recognition, as well as improves security performance in all aspects

SPECIFICATIONS:
Ideal for Access Control & Time & Attendance apps
5-inch touchscreen display
Supports up to 10,000 faces and 3,000 palms
Supports up to 10,000 fingerprints
+ Body Temperature Detection (0.3 °C < 50cm)
+ Mask Detection (recognizes faces wearing a mask)
Comms: TCP/IP, Wiegand In/Out, RS485, 
Visible light camera (speed & remote face enrollment)
Infrared light camera (accuracy)
Controls door lock, alarm, exit button, auxiliary input

DESCRIPTION:
ProFace X [TD] is a fully upgraded version of the ProFace product line, which is designed to deal with all kinds of scenarios. ProFace X [TD] also helps eliminate hygiene concerns; not only because of the contactless recognition technology it is equipped with, but also because of the new functions namely body temperature detection and masked individual identification.

SPECIFICATIONS:
Ideal for Access Control & Time & Attendance apps
8-inch touchscreen display
Supports up to 50,000 faces and 5,000 palms
+ Body Temperature Detection (0.3°C< 50cm)
+ Mask Detection (recognizes faces wearing a mask)
Comms: TCP/IP, Wiegand In/Out, RS485,
Visible light camera (speed & remote face enrollment)
Infrared light camera (accuracy)
Powerful anti-spoofing engine
Controls door lock, alarm, exit button, auxiliary input

NOTE:
This device is device detects masks and body temprature.